NCERT Solutions for Class 9 Science Chapter 2 Is Matter Around Us Pure (Updated Pattern)
What we have learnt
- A mixture contains more than one substance (element and/or compound) mixed in any proportion.
- Mixtures can be separated into pure substances using appropriate separation techniques.
- A solution is a homogeneous mixture of two or more substances. The major component of a solution is called the solvent, and the minor, is the solute.
- The concentration of a solution is the amount of solute present per unit volume or per unit mass of the solution.
- Materials that are insoluble in a solvent and have particles that are visible to the naked eye form a suspension.
- A suspension is a heterogeneous mixture.
- Colloids are heterogeneous mixtures in which the particle size is too small to be seen with the naked eye but are big enough to scatter light. Colloids are useful in industry and daily life. The particles are called the dispersed phase and the medium in which they are distributed is called the dispersion medium.
- Pure substances can be elements or compounds. An element is a form of matter that cannot be broken down by chemical reactions into simpler substances. A compound is a substance composed of two or more different types of elements, chemically combined in a fixed proportion.
- The properties of a compound are different from their constituent elements, whereas a mixture shows the properties of its constituent elements or compounds.
In Lesson Exercise-1
1. What is meant by a substance?
Solution: A substance is a pure single form of matter. It has definite properties and compositions. Example: Iron
2. List the points of difference between homogeneous and heterogeneous mixtures.
Solution:
Homogeneous mixture | Heterogeneous mixture |
Particles are uniformly distributed throughout the mixture | All the particles are completely mixed and can be distinguished with the bare eyes or under a microscope |
Has a uniform composition | Irregular composition |
No apparent boundaries of division | Noticeable boundaries of division |
In Lesson Exercise-2
1. Differentiate between homogenous and heterogeneous mixtures with examples.
Solution:
The following are the differences between heterogeneous and homogenous mixtures.
Heterogeneous mixture | Homogeneous mixture |
All the particles are completely mixed and can be distinguished with the bare eyes or under a microscope | Particles are uniformly distributed throughout the mixture |
Irregular composition | Has a uniform composition |
Noticeable boundaries of division | No apparent boundaries of division |
Examples: Seawater, blood, etc. | Examples: Rainwater, vinegar, etc. |
2. How are sol, solution and suspension different from each other?
Solution:
Attributes | Sol | Solution | Suspension |
Type of mixture | Heterogeneous | Homogeneous | Heterogeneous |
Size of particles | 10-7 – 10-5 cm | Less than 1nm | More than 100nm |
Tyndall effect | Exhibited | Not exhibited | May or may not be exhibited |
Appearance | Usually glassy and clear | Unclouded and clear | Cloudy and opaque |
Visibility | Visible with an ultramicroscope | Not visible | Visible with the naked eye |
Diffusion | Diffuses very slowly | Diffuses rapidly | Do not diffuse |
Stability | Pretty stable | Highly stable | Unstable |
Settling | Get settled in centrifugation | Do not settle | Settle on their own |
Example | Milk, blood, smoke | Salt solution, sugar solution | Sand in water, dusty air |
3. To make a saturated solution, 36g of sodium chloride is dissolved in 100 g of water at 293 K. Find its concentration at this temperature.
Solution:
Mass of solute (NaCl) = 36 g
Mass of solvent (H2O) = 100 g
Mass of solution (NaCl + H2O) = 136 g
Concentration = Mass of solute/Mass of solution x 100
Concentration = 36/136 x 100 = 26.47%
Hence, the concentration of the solution is 26.47%
NCERT Solutions for Class 9 Science Chapter 1 – Matter in Our Surroundings (Updated Pattern)
In Lesson Exercise- 3
1. How will you separate a mixture containing kerosene and petrol (the difference in their boiling points is more than 25°C), which are miscible with each other?
Solution:
According to the question, kerosene and petrol are miscible, and their boiling points differ by more than 25 degrees Celsius, which is a significant difference. Therefore they can be separated using a simple distillation procedure.
Distillation can separate kerosene and petrol since their boiling points differ by more than 25 degrees Celsius. The kerosene and petrol combination will be poured into a hot distillation flask. Because petrol has a lower boiling point, it will evaporate and create vapours first as the temperature of the mixture rises. A condenser condenses the vapours of gasoline and collects them through the condenser output. In the distillation flask, kerosene with a higher boiling point will be left behind.
Because their vapours will develop within the same temperature range if the difference in boiling points of two liquids is not great, a simple distillation procedure cannot be utilised to separate them. Fractional distillation separates these liquids by passing the vapours through a fractionating column before condensation.
2. Name the techniques used to separate the following:
(a) Butter from curd
(b) Salt from seawater
(c) Camphor from salt
Solution:
a) A process known as centrifugation is used to separate butter from curd. The process is governed by the principle of density.
b) We can use the simple evaporation technique to separate salt from seawater. Distillation causes water to evaporate, leaving solid salt behind, hence the production of salt.
c) Sublimation can be used to separate camphor from salt, as during the phase change, camphor does not undergo a liquid phase.
3. What types of mixtures are separated by the technique of crystallisation?
Solution:
The technique of crystallisation is used to separate solids from a liquid solution. It is linked to precipitation, but in this technique, the precipitate is achieved in a crystal form which exhibits extremely high levels of purity. The principle of crystallisation can be applied to purify impure substances.
In Lesson Exercise-4
1. Classify the following as physical or chemical changes:
- Cutting of trees
- Melting of butter in a pan
- Rusting of almirah
- Boiling of water to form steam
- Passing of electric current through water and water breaking into hydrogen and oxygen gases.
- Dissolving common salt in water
- Making a fruit salad with raw fruits, and
- Burning of paper and wood
Solution:
The following is the classification into physical and chemical change:
Physical change | Chemical change |
Cutting the treesBoiling water to form steam melting butter in a pancaking a fruit salad with raw fruits Dissolving common salt in water | Cutting the treesBoiling water to form steam melting of butter in a pancaking a fruit salad with raw fruits Dissolving common salt in water |
2. Try segregating the things around you as pure substances and mixtures.
Solution:
Listed below are the classifications based on pure substances and mixtures:
Pure substance | Mixture |
Water | Soil |
Salt | Salad |
Iron | Air |
Diamond | Steel |
Back Exercise
1. Which separation techniques will you apply for the separation of the following?
(a) Sodium chloride from its solution in water.
(b) Ammonium chloride from a mixture containing sodium chloride and ammonium chloride.
(c) Small pieces of metal in the engine oil of a car.
(d) Different pigments from an extract of flower petals.
(e) Butter from curd.
(f) Oil from water.
(g) Tea leaves from tea.
(h) Iron pins from sand.
(i) Wheat grains from husk.
(j) Fine mud particles suspended in water.
Solution:
(a) In water, sodium chloride in its solution can be separated through the process of Evaporation.
(b) The technique of sublimation is apt as Ammonium chloride supports Sublimation.
(c) Tiny chunks of metal pieces in the engine oil of a car can be manually filtered.
(d) Chromatography can be used for the fine segregation of various pigments from an extract of flower petals.
(e) The technique of centrifugation can be applied to separate butter from curd. It is based on the concept of difference in density.
(f) To separate oil from water, which are two immiscible liquids which vary in their densities, using a funnel can be an effective method.
(g) Tea leaves can be manually separated from tea using simple filtration methods.
(h) Iron pins can be separated from sand either manually or with the use of magnets as the pins exhibit strong magnetic quality, which can be a key characteristic taken into consideration.
(i) The differentiating property between husk and wheat is that there is a difference in their mass. If treated with a small amount of wind energy, a remarkable variation in the moving distance is noticed. Hence, to separate them, the sedimentation/winnowing procedure can be applied.
(j) Due to the property of water, sand or fine mud particles tends to sink in the bottom as it is denser provided they are undisturbed. Through the process of sedimentation/decantation, water can be separated from fine mud particles, as the technique is established on obtaining clear water by tilting it out.
2. Write the steps you would use for making tea. Use the words solution, solvent, solute, dissolve, soluble, insoluble, filtrate, and residue.
Solution:
(a) Into a vessel, add a cup of milk, which is the solvent, and supply it with heat.
(b) Add tea powder or tea leaves to the boiling milk, which acts as a solute. Continue to heat.
(c) The solute, i.e., the tea powder, remains insoluble in the milk, which can be observed while it is still boiling.
(d) At this stage, add some sugar to the boiling solution while stirring.
(e) Sugar is a solute but is soluble in the solvent.
(f) Continuous stirring causes the sugar to dissolve completely in the tea solution, reaching saturation.
(g) Once the raw smell of tea leaves vanishes and the tea solution is boiled enough, take the solution off the heat, filter or strain it to separate the tea powder and the tea solution. The insoluble tea powder remains as a residue while the solute (sugar) and the solvent (essenced milk solution) strain through the filter medium, which is collected as the filtrate.
3. Pragya tested the solubility of three different substances at different temperatures and collected the data as given below (results are given in the following table, as grams of a substance dissolved in 100 grams of water to form a saturated solution).
Substance dissolved | Temperature in K | ||||
283 | 293 | 313 | 333 | 353 | |
Solubility | |||||
Potassium nitrate | 21 | 32 | 62 | 106 | 167 |
Sodium chloride | 36 | 36 | 36 | 37 | 37 |
Potassium chloride | 35 | 35 | 40 | 46 | 54 |
Ammonium chloride | 24 | 37 | 41 | 55 | 66 |
(a) What mass of potassium nitrate would be needed to produce a saturated solution of
potassium nitrate in 50 grams of water at 313K?
(b) Pragya makes a saturated solution of potassium chloride in water at 353 K and leaves the
solution to cool at room temperature. What would she observe as the solution cools? Explain.
(c) Find the solubility of each salt at 293 K. Which salt has the highest solubility at this
temperature?
(d) What is the effect of change of temperature on the solubility of a salt?
Solution:
(a) Given:
Mass of potassium nitrate required to produce a saturated solution in 100 g of water at 313 K = 62g
To find:
Mass of potassium nitrate required to produce a saturated solution in 50 g of water =?
Required amount = 62 x 50/100 = 31
Hence, 31 g of potassium nitrate is required.
(b) The solubility of potassium chloride in water is decreased when a saturated solution of potassium chloride loses heat at 353 K. Consequently, Pragya would observe crystals of potassium chloride, which would have surpassed its solubility at low temperatures.
(c) As per the given data, that is
Solubility of potassium nitrate at 293K = 32 g
Solubility of sodium chloride at 293K = 36 g
Solubility of potassium chloride at 293K = 35 g
Solubility of ammonium chloride at 293K = 37g
We can observe from this data that ammonium chloride has the highest solubility at 293K.
(d) Effect of change of temperature on the solubility of salts:
The table depicts that the solubility of the salt is dependent upon the temperature and increases with an increase in temperature. With this, we can infer that when a salt arrives at its saturation point at a specific temperature, there is a propensity to dissolve more salt through an increase in the temperature of the solution.
4. Explain the following, giving examples.
(a) Saturated solution
(b) Pure substance
(c) Colloid
(d) suspension
Solution:
(a) Saturated solution: It is the state in a solution at a specific temperature when a solvent is no longer soluble without an increase in temperature. Example: Excess carbon leaves off as bubbles from a carbonated water solution saturated with carbon.
(b) Pure substance: A substance is said to be pure when it comprises only one kind of molecule, atom or compound without adulteration with any other substance or any divergence in the structural arrangement. Examples: Sulphur, diamonds etc.
(c) Colloid: A Colloid is an intermediate between solution and suspension. It has particles of various sizes that range between 2 to 1000 nanometers. Colloids can be distinguished from solutions using the Tyndall effect. Tyndall effect is defined as the scattering of light (light beam) through a colloidal solution. Examples: Milk and gelatin.
(d) Suspension: It is a heterogeneous mixture that comprises solute particles that are insoluble but are suspended in the medium. These particles that are suspended are not microscopic but visible to bare eyes and are large enough (usually larger than a micrometre) to undergo sedimentation.
5. Classify each of the following as a homogeneous or heterogeneous mixture.
soda water, wood, air, soil, vinegar, filtered tea.
Solution:
The following is the classification of the given substances into homogenous and heterogenous mixtures.
Homogenous mixture | Heterogeneous mixture |
Soda water | wood |
vinegar | soil |
Filtered tea | |
Air |
6. How would you confirm that a colourless liquid given to you is pure water?
Solution:
We can confirm if a colourless liquid is pure by setting it to boil. If it boils at 100°C, it is said to be pure. But if there is a decrease or increase in the boiling point, we infer that water has added impurities and, hence not pure.
7. Which of the following materials fall into the category of “pure substance”?
(a) Ice
(b) Milk
(c) Iron
(d) Hydrochloric acid
(e) Calcium oxide
(f) Mercury
(g) Brick
(e) Wood
(f) Air.
Solution:
The following substances from the above-mentioned list are pure substances:
- Iron
- Ice
- Hydrochloric acid
- Calcium oxide
- Mercury
8. Identify the solutions among the following mixtures.
(a) Soil
(b) Seawater
(c) Air
(d) Coal
(e) Soda water
Solution:
The following are the solutions from the above-mentioned list of mixtures:
- Sea water
- Air
- Soda water
9. Which of the following will show the “Tyndall effect”?
(a) Salt solution
(b) Milk
(c) Copper sulphate solution
(d) Starch solution
Solution:
Tyndall effect is exhibited by only milk and starch solution from the above-mentioned list of solutions.
10. Classify the following into elements, compounds and mixtures.
(a) Sodium
(b) Soil
(c) Sugar solution
(d) Silver
(e) Calcium carbonate
(f) Tin
(g) Silicon
(h) Coal
(i) Air
(j) Soap
(k) Methane
(l) Carbon dioxide
(m) Blood
Solution:
Elements | Compounds | Mixture |
Sodium | Calcium carbonate | Soil |
Silver | Carbon dioxide | Sugar solution |
Tin | Methane | Coal |
Silicon | Air | |
Blood | ||
Soap |
11. Which of the following are chemical changes?
(a) Growth of a plant
(b) Rusting of iron
(c) Mixing of iron filings and sand
(d) Cooking of food
(e) Digestion of food
(f) Freezing of water
(g) Burning of candle
Solution:
Out of the given list, the following are chemical changes:
Growth of a plant, rusting of iron, cooking of food, digestion of food and burning of candles.